Metal Hardness Tester Kit 7-in-1 High Precision Portable Leeb Hardness Tester Durometer for Metal Pipe Steel Plate Mould Surface Leeb Hardness Tester(Hardness G Type)

The Leeb hardness tester has D Type, D+15 Type, C Type , G Type , DL Type impact device modelsD Type device Measuring Range(170-960)HLD(17-68.5)HRC(19-651)HB(80-976)HV(30-100)HS(59-85)HRA(13-100)HRBD Type deviceAccuracy: ≤6HLD (HLD=800)Repeatability: ≤6HLD (HLD=800)Resolution: 1HL, 1HV, 1HB, 0.1HRB, 0.1HRC, 0.1HSMaterials: steel & cast steel alloy tool steel stainless steel, grey cast iron, spheroidal iron, cast aluminum, brass, bronze, wrought copper alloy.Impact devices: D (optional impact devices: C,G,DC,DL)Metal Hardness Tester Portable1. Installed machinery or permanent assembly parts.2. M-old cavity.3. Heavy workpieces.4. Failure analysis of pressure vessels, steam turbine generator sets and their equipment.5. The test space is very small for the workpiece.6. Bearings and other parts.7. A formal original record of the test results is required.8. Material classification of metal material warehouse.9. Quick inspection of multiple measurement positions in a large range of large workpiecesPacking List :1. Main unit2. model *type impact device With cable3. Cleaning brush4. Small support ring5. Manual6. Instrument packageKindly Tips :This SOONDA SKD-552 Leeb hardness tester instrument is a precision measuring instrument for engineering metal hardness.Before you buy,1. please confirm whether your measuring material meets the measurement of this instrument; 2. The measured value is suitable; 3. You can leave the address and send it to you The electronic version of the manual, the translator translates into the native language to read; 4. If you need help, please leave a message to contact; 5 .happy shopping

• 【D Type device】: Dimensions: f20*70mm, weight: 75g. General purpose type, used for most hardness measurements
• 【D+15 Type device】: Dimensions: f20*162mm, weight: 80g. Small head, used to measure the hardness of the outer surface of grooves or recesses
• 【C Type device】: Dimensions: f20*141mm, weight: 75g. The impact energy is large, the Leeb hardness tester is used to measure the hardness of small, light, thin parts and the surface softening layer
• 【G Type device】: Dimensions: f30*254mm, weight: 250g. The impact energy is large, and the requirement for measuring the outer surface is low. Used for large, heavy and rough forging castings
• 【DL Type device】: Dimensions: f20*202mm, weight: 80g, the head becomes thinner and larger, the Leeb hardness tester is used to measure the hardness of narrow grooves and gear surfaces